Deployment Guide

Setting Boot Mode
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for setting the boot mode of the
controller.
Table 345. Setting Boot mode
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ctrl -c=id -
ac=sbm —bm=<0|1|
2> or controller
controllerid=id
action=setbootmod
e bootmode=<0|1|
2>
NA NA
Sets the boot mode of the controller to any of
the following during the system start or reboot:
● Stop on error (0)
● Continue on error (1)
● Continue headless on error (2)
Example:
A:>raidcfg -ctrl -c=2 -ac=sbm -
bm=0
Configuring Auto Import
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for configuring the auto import property
of the controller.
Table 346. Configuring Auto Import
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ctrl -c=id -
ac=eai —ai=<0|1>
or controller
controllerid=id
action=enableauto
import
autoimport=<0|1>
NA NA
Sets the auto import property of the controller
to 1 (enables the auto import property to
automatically import the foreign configuration) or
0 (disables the auto import property).
Example:
A:>raidcfg -ctrl -c=2 -ac=eai -
ai=0
Miscellaneous Options
The following table lists all other RAIDCFG options, parameters, and pre-defined arguments.
Table 347. Miscellaneous Optional Parameters
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
any option
-l or logfile <filename>
Logs command line output to a file. The utility
either appends the information to an existing log
file or creates a new file. The log file contains the
same information as standard output. This option
is optional and can be added to the command line
in any order after the mandatory options have
been added.
194 RAIDCFG