Deployment Guide

Table 327. RAIDCFG Options for Foreign Configurations (continued)
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ctrl -c=id -ac=
fgnclr
or
controllercontrol
lerid=id
foreignclear
NA NA
Clears the foreign configuration detected in the
selected controller. This feature is supported on
PERC 5 and later controllers and is not supported
on SAS controllers..
If you use this argument on a controller that
does not have a foreign configuration, the
No Foreign configuration present in
the controller message is displayed.
NOTE: For clearing secured foreign
configuration, use instantsecureerase
or insecerase. For more details, see
Erasing Encrypted Physical Disk.
Example:
A:>raidcfg -ctrl -c=2 -ac=fgnclr
-ctrl -c=id
-ac=fgnrvr
or
controller
controllerid=id
action=foreignrec
over
NA NA
Recovers the foreign configuration detected in
the selected controller. This feature is supported
on PERC 5 and later controllers and is not
supported on SAS controllers.
If you use this argument on a controller that
does not have a foreign configuration, the
No Foreign configuration present in
the controller message is displayed.
Example:
A:>raidcfg -ctrl -c=2 -ac=fgnrvr
Importing Secured Foreign Configuration
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for importing secured foreign
configuration of the virtual disks.
Table 328. RAIDCFG Options for Importing Secured Foreign Configuration
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ctrl -c=id
-ac=isfc -
pp=passphrase
or
controller
controllerid=id
action=importsecu
reforeignconfig
passphrase=passph
rase
NA NA
Imports the foreign configuration of the virtual
disks secured with the specified passphrase.
Example:
A:>raidcfg -ctrl -c=2 -ac=isfc -
pp=Dell_123
RAIDCFG 185