Deployment Guide

Table 299. serialchannelinfo (continued)
Option Sub-option Valid Arguments Description
Example:
A:>syscfg serialchannelinfo
--mediumtype
mediumtype= asynch
serialuseraccess
Table 300. serialuseraccess
Option Sub-option Valid Arguments Description
serialuseraccess or
sua
Configures the privilege level and
channel accessibility associated with a
specified User ID for the serial channel.
This option can be replicated.
--userid
2–16, if your system
has a DRAC 5 controller
Sets the User ID. This sub-option can
be replicated.
--usrprivlmt user, operator,
administrator,noa
ccess
Sets the maximum BMC user privilege
level for the serial channel for
the User ID specified using the
userid sub-option. This sub-option
can be replicated. This sub-option is
dependent on the userid sub-option.
--
currentenableduserid
s
NA Reports the number of currently
enabled User IDs on the serial channel.
This sub-option can be replicated.
--
useridswithfixedname
s
NA
Reports the number of User IDs with
fixed names on the serial channel. This
sub-option can be replicated.
Example 1 (to enable User ID 2 on
the serial channel with administrator
privileges ) :
A:>syscfg
serialuseraccess
--userid=2 --
usrprivlmt=administrator
userid=2
usrprivlmt=administrator
status=enable
Example 2 (to enable User ID 4 on the
serial channel with user privileges ):
A:>syscfg
serialuseraccess
144
SYSCFG