Deployment Guide

lanchannelaccess
Table 283. lanchannelaccess
Option Sub-option Valid Arguments Description
lanchannelaccess or
lca
Sets or displays the LAN channel access
settings such as alerting, IPMI over LAN,
and user privilege. This option can be
replicated.
--pefalerting enable, disable
Enables or disables PEF alerts. This sub-
option can be replicated.
--ipmioverlan disable,
alwaysavail
Sets the LAN channel access mode. This
sub-option can be replicated.
--channelprivlmt user, operator,
administrator
Sets the maximum privilege level accepted
for the LAN channel. This sub-option can
be replicated.
Example (to configure the LAN channel
with alerts and IPMI over LAN enabled):
A:>syscfg lanchannelaccess--
pefalerting=enable --
ipmioverlan=alwaysavail
lanchannelinfo
Table 284. lanchannelinfo
Option Sub-option Valid Arguments Description
lanchannelinfo or
lci
NA NA Displays media and protocol information about
the LAN channel. This option cannot be
replicated.
lanuseraccess
Table 285. lanuseraccess
Option Sub-option Valid Arguments Description
lanuseraccess
or lua
Configures the privilege level and channel
accessibility associated with a specified
User ID for the LAN channel.
--userid
2–16, if your system
has a DRAC 5
controller
Sets the User ID. This sub-option can be
replicated.
--usrprivlmt user, operator,
administrator,
noaccess
Sets the maximum BMC user privilege
level for the LAN channel for the userid
specified using the useridsub-option. This
sub-option can be replicated. This sub-
option is dependent on the userid sub-
option.
--currentenableduserids
NA Reports the number of currently enabled
User IDs on the LAN channel.
134 SYSCFG