Deployment Guide

Table 270. remflashmedia (continued)
● Active — The card is used for secure digital reads.
● Standby — The card is receiving a copy of all secure digital reads.
● Failed — An error is reported during a secure digital read or write.
● Absent — No secure digital media is detected.
● Offline — At boot, card identification signature is different from the non-volatile
storage value or card is the destination of a copying operation that is in progress.
● Write Protected — The card is write-protected.
Example:
A:>syscfg --remflashmedia
Internal Dual SD ModuleRedundancy=Lost
SD1 status=Absent
SD1 status=Active
Applicable Systems All systems prior to PowerEdge 12G systems
serial1
Table 271. serial1
Valid Arguments disable, com1, com3, com1_bmc, bmcserial, bmclan, rac
Description
Configures or reports the first serial port communication port. This option can be
replicated.
● bmcserial — maps serial port 1 to BMC Serial.
● bmclan — routes the serial traffic destined for serial1 out to NIC1.
● com1_bmc — maps serial port 1 to COM port 1 BMC.
● rac — maps serial port 1 to the RAC device.
Example:
A:>syscfg --serial1=rac
serial1=rac
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
serial2
Table 272. serial2
Valid Arguments auto, disable, com2, com4
Description
Configures or reports the second serial port communication port. This option can be
replicated.
Example:
A:>syscfg --serial2=rac
serial2=rac
SYSCFG 127