Deployment Guide

Table 231. embnic1pxe (continued)
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embnic2pxe
Table 232. embnic2pxe
Valid Arguments enable, disable
Description
Enables or disables Preboot Execution Environment (PXE) on the second embedded
NIC. If PXE is disabled, the second NIC is not found in the boot order. If PXE is
enabled, the second NIC is placed at the end of the boot order. This option is only
present on systems that do not support the embnic2 option. This option can be
replicated.
Example:
A:>syscfg --embnic2pxe=enable
embnic2pxe=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embnics
Table 233. embnics
Valid Arguments enable, disable
Description
Turns both the embedded NICs on or off. This option is only present on systems that
do not support the embnic1 and embnic2 options. This option can be replicated.
Example:
A:>syscfg --embnics=enable
--embnics=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embscsi1
Table 234. embscsi1
Valid Arguments
on, off
Description
Turns the first embedded SCSI controller. This option is only valid for supported
systems that have an embedded SCSI controller. This option can be replicated.
Example:
A:>syscfg --embscsi1=on
embscsi1=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
SYSCFG 111