Deployment Guide

Table 213. TpmStatus (continued)
● On 12G and later systems: read-only
Description
Displays the current status of TPM.
Example:
A:>syscfg --TpmStatus
Applicable Systems PowerEdge 12G and later systems
TpmInfo*
Table 214. TpmInfo*
Valid Arguments
● On systems prior to 13G: NA
● On 13G and later systems: read-only
Description
Displays the TPM type and firmware version.
Example:
A:>syscfg --TpmInfo
Applicable Systems PowerEdge 13G and later systems
TpmCommand
Table 215. TpmCommand
Valid Arguments
● On systems prior to 13G: NA
● On 13G and later systems: None, Activate, Deactivate, Clear
Description
Configures the Trusted Platform Module (TPM).
● None
— Commands are not sent to the TPM.
● Activate — TPM is enabled.
● Deactivate — TPM is disabled.
● Clear — All the contents of TPM are cleared.
NOTE: This field is read-only when TpmSecurityis set to Off.
CAUTION: Clearing TPM results in loss of all keys in the TPM. This could
affect booting to operating system.
Example:
A:>syscfg --TpmCommand=Activate
Applicable Systems PowerEdge 13G and later systems
SYSCFG 103