Deployment Guide

5. Set the variable that defines the directory containing DTK deployment scripts (DT_SCRIPTS). This variable is set to %DT_PATH%

\Template\Scripts (Windows) or $dt_path/template/scripts (Linux) by default in the sample script. Edit this path to

reflect the actual location of DTK deployment scripts, if necessary.

6. Set the variable that indicates whether you want the deployment process to exit when any error is returned (DT_STOP_ON_ERROR).

This variable is set to FALSE by default in the sample script, indicating that errors are handled by the ERRHNDL.BAT (Windows) or

errhndl.sh (Linux) script. Set the value to TRUE only if you want the deployment to exit when any error is returned.

7. For Linux, set the variable that defines the directory containing the DRMK system files necessary to create a Dell utility partition

(DT_DRMK). This variable is set to $dt_path/opt/dell/drmk by default in the sample script. Edit this path to reflect the actual

location of the DRMK files, if necessary.

Specifying the SYSCFG variables

The SYSCFG replication file is set to syscfg.ini by default. If you used the SYSCAP.BAT (for Windows) or syscap.sh (for Linux)

sample script to generate the file, there is no need to edit the default settings. If you have modified the sample scripts or to the suggested

directory structure, confirm that syscfg.ini is correctly named and that the path is set correctly for deployment.

To edit the SYSCFG capture variables, locate the following lines:

In SYSCAP.BAT on systems running Windows:

set DT_SYS_CAPFILE=%DT_SYSTEMS%\%DT_PLATFORM%\syscfg.ini

In syscap.sh on systems running Linux:

set DT_SYS_CAPFILE=$dt_systems/$dt_platform/syscfg.ini

To edit the SYSCFG replication variables, locate the following lines:

In SYSREP.BAT on systems running Windows:

set DT_SYS_REPFILE=%DT_SYSTEMS%\%DT_PLATFORM%\syscfg.ini

In syscap.sh on systems running Linux:

DT_SYS_REPFILE=$dt_systems/$dt_platform/syscfg.ini

NOTE:

If the replication requires a change in the memory redundancy mode, reboot the target server and execute the

script again to complete the replication.

Specifying the RAC configuration variables

The IP address for your target system RAC is set in the sample script as 10.98.8.121 by default. Edit this value to reflect the actual IP

address of your target system RAC, if applicable. Additionally, the RAC configuration file used to configure your RAC is set by default to

raccfg.ini. If you use the RACCAP.BAT or raccap.sh sample script to generate the raccfg.ini file, there is no need to edit this

default setting. If you have made any modifications to the sample scripts or to the suggested directory structure, you must confirm that

raccfg.ini is correctly named and that the path is correctly set for your deployment.

To edit the RAC configuration variables, locate the following lines:

In RACCAP.BAT:

set DT_RAC_CAPFILE=%DT_SYSTEMS%\%DT_PLATFORM%\raccfg.ini

In raccap.sh:

DT_RAC_CAPFILE=$dt_systems/$dt_platform/raccfg.ini

To edit the RAC configuration variables, locate the following lines:

In RACREP.BAT:

:: RAC section

set DT_NICCFG=10.98.8.121

set DT_RAC_CAPFILE=%DT_SYSTEMS%\%DT_PLATFORM%\raccfg.ini

Preparing the script files