Deployment Guide

::%DT_TOOLS%\syscfg --bootseq=hdd.emb.0
::call WIN2K8.BAT
Editing the sample batch files to perform a
complete system deployment
The sample scripts utilize DTK utilities, the additional supporting utilities, the source system configuration files, the target system hardware
drivers, and the operating system installation files to perform a full deployment on the target system.
The sample scripts provided with DTK can be edited and customized using any ASCII text editor that conforms to the hardware available
on the target systems. While it is recommended that you use DTK sample scripts to automate your deployment tasks. You can create your
own system deployment batch files using any ASCII text editor by incorporating the various DTK utilities and commands in the batch file.
NOTE: For more information about scripting batch files and specific batch file commands, see your Windows PE or
Linux operating system documentation.
Each of the utilities, scripts, and system configuration files are described. Depending on your requirements, you may use all or only some of
them in your deployment. You can write your master deployment file to perform a full deployment on a system with the help of utilities,
scripts, and configuration files. This file is not provided with the sample scripts.
Scripts for deployment on systems running windows
The following table lists the capture scripts for Windows.
Table 20. Capture Scripts for Windows
Script Name Description Associated Files
RACCAP.BAT
Captures RAC settings to a file for Dell
Remote Access Controller 4 (DRAC 4).
• TKENVSET.BAT — Provides information to the tasks scripts
about the location of the DTK utilities, scripts, and configuration
files.
• RACADM.EXE — Retrieves RAC information and configure
settings.
SYSCAP.BAT
Captures BIOS and Baseboard
Management Controller (BMC)
configuration settings and saves them to a
file.
• TKENVSET.BAT — Provides information to the tasks scripts
about the location of the DTK utilities, scripts, and configuration
files.
• SYSCFG.EXE — Configures the BIOS and BMC settings.
RAIDCAP.BAT
Captures the RAID settings and saves
them to a file
• TKENVSET.BAT — Provides information to the tasks scripts
about the location of the DTK utilities, scripts, and configuration
files.
• RAIDCFG.EXE — Retrieves RAID information and configure
settings.
Scripts for deployment on systems running Linux
The following table lists the capture scripts for Linux.
Table 21. Capture Scripts for Linux
Script Name Description Associated Files
raccap.sh
Captures RAC settings to a file for DRAC
4.
• tkenvset.sh — Used by raccap.sh to inform the task scripts
where to find the DTK utilities, scripts, and configuration files.
• racadm — Used by raccap.sh to retrieve RAC information and to
configure settings. The wrapper script, racadm, invokes racadm4,
racadm5, or racadm6 depending on the system configuration.
• syscfg— Used by raccap.sh to configure DRAC.
36 Preparing the script files