Release Notes

Use both DTK and the Server Administrator from the same release version to get complete supported features of Server Administrator.
From DTK 4.4.1 onwards, the product carries GNU Bash update packages to fix the Shellshock vulnerability (CVE-2014-7169 and
CVE-2014-6271).
DTK operating system deployment limitation:
DTK does not support operating system deployment, when multiple boot VDs exist on a single controller or when the server has multiple
boot controllers. If multiple boot controllers exist on the server, the boot VD must be created on any one of the controllers, and the boot
VD must be set as first boot device in system BIOS.
NOTE: During booting WInPE ISO image for Windows PE 4.0, Windows PE 5.0 and Windows PE 10.0 user will not be prompted
for entering any key to continue.
DTK does not support Linux operating system deployment in Non RAID (Volume) and SWRAID mode on s100/s300/S110/S130
controllers.
SYSCFG
• Some options may not be present on all systems, which may be due to the BIOS version or hardware feature set. The usage
information generated by running SYSCFG without arguments shows only those options that are valid for your system.
• The --devseq option is present only if you have an available, bootable hard-disk partition. If this option is present in the configuration
file, but not present on your system, you will receive a usage error.
• To enable certain options, to reboot your system. Dell recommends you use the "reboot" command on shell prompt or press the Ctrl
+Alt+Del keys.
• It is required to perform a warm reboot after applying the SYSCFG settings changes on Dell’s 12th generation of PowerEdge systems.
• If you perform operations that change the --redmem option, reboot your system immediately. It is applicable to both command line
and --infile usage.
NOTE:
Additionally, the --redmem option should not be issued with any other command and should be immediately followed
by a system reboot. This is important when you develop scripts that can alter the --redmem setting.
• For options that use text strings such as username, password, hostname, and community string, using characters such as "<," ">," "|,"
"=" on the command line can be misinterpreted by the command line parser and may cause errors. To avoid such errors, use only
alphanumeric characters.
• If you set the username using SYSCFG username option, Serial Over Lan (SOL) access for the corresponding user will be enabled by
default. You can disable SOL access for a user using syscfg solaction --userid=--action=disable command.
• The legacy attribute values enable and disable are also supported for Dell’s 12th generation of PowerEdge systems for backward
compatibility. In future releases these arguments might be deprecated. Try to use the values displayed in help message for BIOS
options for Dell’s 12th generation of PowerEdge systems
• It is required to perform a warm reboot after applying the SYSCFG settings changes on Dell PowerEdge 12th generation of
PowerEdge systems.
• If you perform operations that change the "--redmem" option, reboot your system immediately. It is applicable to both command line
and "--infile" usage.
NOTE:
Additionally, the --redmem option should not be issued with any other command and should be immediately followed
by a system reboot. This is important when you develop scripts that can alter the --redmem setting.
• For options that use text strings such as username, password, hostname, and community string, using characters such as <space>,
"<," ">," "|," "=" on the command line can be misinterpreted by the command line parser and may cause errors. To avoid such errors,
use only alphanumeric characters.
• If you set the username using syscfg username option, Serial over LAN (SOL) access for the corresponding user will be enabled by
default. You can disable SOL access for a user using syscfg solaction --userid=<userid> --action=disable command.
• The legacy attribute values enable and disable are also supported for 12G systems for backward compatibility. In future releases these
arguments might be deprecated. Try to use the values displayed in help message for BIOS options for Dell’s 12th generation of
PowerEdge systems.
RAIDCFG
• When creating virtual disks, the chunk (stripe) size is always in KBs. Do not specify any units of measure for the chunk size.
• When providing multiple physical disks for the "create virtual disk" command, do not separate the disks with spaces.
4
Dell OpenManage Deployment Toolkit 5.4 for Microsoft Windows Preinstallation Environment Release Notes