Deployment Guide

NOTE: The value of n in ProcnTurboCoreNum can be 0–3.
Example:
A:>syscfg --Proc1TurboCoreNum=6
Proc1TurboCoreNum=6
EnergyPerformanceBias
Table 195. EnergyPerformanceBias
Valid Arguments
• On systems prior to Dell’s 13th generation PowerEdge systems: NA
• On Dell’s 13th generation PowerEdge and later systems: MaxPower,
BalancedPerformance, BalancedEfficiency, LowPower
Description
Sets the Energy Efficient Policy. The CPU uses this setting to control the internal
behavior of the processor and to determine whether to target higher performance or
better power savings.
Example:
A:>syscfg --EnergyPerformanceBias=MaxPower
Applicable Systems Dell’s 13th generation PowerEdge and later systems
UncoreFrequency
Table 196. UncoreFrequency
Valid Arguments
• On systems prior to Dell’s 13th generation PowerEdge systems: NA
• On Dell’s 13th generation PowerEdge and later systems: DynamicUFS, MaxUFS,
MinUFS
Description
Sets the processor uncore frequency. Dynamic mode allows the processor to optimize
power resources across the cores and uncore during runtime. The optimization of the
uncore frequency to either save power or to optimize the performance is dependent on
the EnergyPerformanceBias option setting.
Example:
A:>syscfg --UncoreFrequency=DynamicUFS
Applicable Systems Dell’s 13th generation PowerEdge and later systems
System Security
You can manage the system security properties of the BIOS using the options in this group.
AcPwrRcvry / acpower
Table 197. AcPwrRcvry / acpower
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: on, off, last
• On Dell’s 12th generation PowerEdge and later systems: On, Off, Last
Description Sets the behavior for the system after AC power is lost. This option specifies how the
system responds to the restoration of AC power and is particularly useful in systems
that are turned off using a power strip. When set to on, the system turns on after AC
is restored. When set to off, the system does not turn on after AC is restored. When
set to
last, the system turns on if the system was on when AC power was lost; if the
91