Deployment Guide

SerialPortAddress / serialportaddrsel
Table 172. SerialPortAddress / serialportaddrsel
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: default, alternate
• On Dell’s 12th generation PowerEdge and later systems: Serial1Com1Serial2Com2,
Serial1Com2Serial2Com1, Com1, Com2
Description
Sets the port address of the serial devices.
On systems prior to Dell’s 12th generation PowerEdge systems, when this option is
default, Serial Device 1 is set to COM port 1 and Serial Device 2 is set to COM port 2.
On systems prior to Dell’s 12th generation PowerEdge systems, when this option is
alternate, Serial Device 1 is set to COM port 2 and Serial Device 2 is set to COM port 1.
This option can be replicated.
Example:
A:>syscfg --serialportaddrsel=default
serialportaddrsel=default
Applicable Systems Dell’s 11th generation PowerEdge and later systems
Slot Disablement
You can manage the slot disablement settings using the options in this group.
Slot n
Table 173. Slot
n
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: NA
• On Dell’s 12th generation PowerEdge and later systems: Enabled, Disabled,
BootDriverDisabled
Description
Controls the configuration of the installed card in the specified slot.
NOTE: The value of n in Slot n can be 1–10.
Example:
A:>syscfg --Slot1=Enabled
Slot1=Enabled
Applicable Systems Dell’s 12th generation PowerEdge and later systems
System Information
You can view the system configuration details using the options in this group.
SysMfrContactInfo*
Table 174. SysMfrContactInfo
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: NA
84