Deployment Guide

Example:
A:>syscfg --OneTimeUefiBootSeqDev= 2,3,4,5,1,6
The following devices are set in the boot sequence:
Device 2:* usbcdrom.slot.1- USB CD-ROM device
Device 3:* virtualcd.slot.1 – VIRTUAL CDROM
Device 4:* hdd.emb.0 -Hard drive C:
Device 5:* nic.emb.1 - MBA v2.5.12 Slot 0500
Device 1:* virtualfloppy.slot.1 - VIRTUAL FLOPPY
Device 6:* usbfloppy.slot.1 - USB Floppy device
NOTE: The asterisk indicates that the device is enabled in the BIOS.
Applicable Systems PowerEdge 12G and later systems.
Processor Settings
You can manage the processor settings using the options in this group.
DataReuse/datareuse
Table 83. DataReuse/datareuse
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Enabled, Disabled
Description
Enables (default value) or disables data reuse in cache. Set to enable for High
Performance Computing (HPC) applications. Set to disable for energy efficiency. This
option can be replicated.
A:>syscfg --datareuse=enable
datareuse=enable
Applicable Systems PowerEdge 11G and later systems
DcuIpPrefetcher
Table 84. DcuIpPrefetcher
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Enabled, Disabled
Description
Enables (default value) or disables DCU IP Prefetcher.
Example:
A:>syscfg --DcuIpPrefetcher=Enabled
DcuIpPrefetcher=Enabled
Applicable Systems PowerEdge 12G and later systems
DcuStreamerPrefetcher/dcustreamerprefetcher
Table 85. DcuStreamerPrefetcher/dcustreamerprefetcher
Valid Arguments • On systems prior to 12G: enable, disable
59