Deployment Guide

NOTE: If set to DisabledOs, the Integrated NICs may still be available for

shared network access by the embedded management controller. This

function must be configured through the NIC management utilities provided

with your system.

Example:

A:>syscfg --IntegratedNetwork1=Enabled

IntegratedNetwork1=Enabled

Applicable Systems PowerEdge 12G and later systems

IntegratedNetwork2

Table 36. IntegratedNetwork2

Valid Arguments

• On systems prior to 12G: NA

• On 12G and later systems: Enabled, DisabledOs

Description Enables or disables Integrated Network 2.

NOTE: If set to DisabledOs, the Integrated NICs may still be available for

shared network access by the embedded management controller. This

function must be configured through the NIC management utilities provided

with your system.

Example:

A:>syscfg --IntegratedNetwork2=Enabled

IntegratedNetwork2=Enabled

Applicable Systems PowerEdge 12G and later systems

IntegratedRaid/integratedraid

Table 37. IntegratedRaid/integratedraid

Valid Arguments

• On systems prior to 12G: enable, disable

• On 12G and later systems: Enabled, Disabled

Description

Enables or disables the integrated RAID controller. This option can be replicated.

Example:

A:>syscfg --integratedraid=disable

integratedraid=disable

Applicable Systems All PowerEdge systems.

IntegratedSas/integratedsas

Table 38. IntegratedSas/integratedsas

Valid Arguments

• On systems prior to 12G: enable, disable

• On 12G and later systems: Enabled, Disabled

Description

Enables or disables the integrated SAS controller. This option can be replicated.