Deployment Guide

Example:

A:>syscfg --SetLegacyHddOrderFqdd1=xxxx,yyy,zzzz

SetLegacyHddOrderFqdd1=xxxx,yyy,zzzz

Applicable Systems PowerEdge 13G and later systems

Integrated Devices

You can use the options in this group to manage the integrated devices such as internal NIC and integrated USB.

EmbNic1/embnic1

Table 27. EmbNic1/embnic1

Valid Arguments

• On systems prior to 12G: on, off, onnopxe, onwithiscsi

• On 12G and later systems: Enabled, EnabledPxe, EnablediScsi, Disabled

Description

Turns the first embedded NIC on with PXE on, off, or on without PXE enabled. This

option is only valid for supported systems that have a NIC. If the NIC is enabled

without PXE, it is not found in the boot order. If the NIC is turned on with PXE, it is

placed at the end of the boot order. The onnopxe argument is not supported on all

systems.

The onwithiscsi argument enables the embedded NIC to boot from the iSCSI server.

The embnic1 option can be replicated.

Example:

A:>syscfg --embnic1=onnopxe

embnic1=onnopxe

Applicable Systems All PowerEdge systems

EmbNic1Nic2/embnic1nic2

Table 28. EmbNic1Nic2/embnic1nic2

Valid Arguments

• On systems prior to 12G: enable, disable

• On 12G and later systems: Enabled, Disabled, DisabledOs

Description

Enables or disables the operating system interface of the first and second embedded

NIC controllers.

Example:

A:>syscfg --embnic1nic2=enable

--embnic1nic2=enable

Applicable Systems PowerEdge 11G and later systems

EmbNic2/embnic2

Table 29. EmbNic2/embnic2

Valid Arguments

• On systems prior to 12G: on, off, onnopxe, onwithiscsi

• On 12G and later systems: Enabled, EnabledPxe, EnablediScsi, Disabled

Description

Turns the second embedded NIC on with PXE on, off, or on without PXE enabled. This

option is only valid for supported systems that have a NIC. If the NIC is enabled