Deployment Guide

Example 1:
A:>syscfg --devseq
The following devices are set in the disk device sequence:
Device 1:* hdd.emb.0 - System BIOS boot devices
Device 2:* scsiraid.slot.3 - PERC 5/E Adapter(bus 02 dev 02)
Device 3:* usbkey.slot.0 - Hard-disk-emulated USB flash
drive
Example 2:
A:>syscfg --devseq= hdd.emb.1,scsiraid.emb.1
The following devices are set in the disk device sequence:
Device 1:* hdd.emb.0 - System BIOS boot devices
Device 2:* scsiraid.emb.1 - AIC-7899, A:00 Seagate
NOTE: The asterisk indicates that the device is enabled in the BIOS.
Applicable Systems All PowerEdge systems.
Boot Settings
You can manage the boot settings using the options in this group.
BootMode/bootmode
Table 22. BootMode/bootmode
Valid Arguments
• On systems prior to 12G: uefi, bios
• On 12G and later systems: Uefi, Bios
Description
Determines the boot mode of the system. Allows booting to Unified Extensible
Firmware Interface (UEFI) -capable operating systems or ensures compatibility with
operating systems that do not support UEFI.
NOTE: If boot mode is modified, reboot the system before executing the OS
installation scripts.
Example:
A:>syscfg --bootmode=uefi
bootmode=uefi
Applicable Systems All PowerEdge 11G and later systems
BootSeqRetry/bootseqretry
Table 23. BootSeqRetry/bootseqretry
Valid Arguments
• On systems prior to 12G: enable, disable
39