Deployment Guide

Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
any order after the mandatory options have been
added.
Example:
A:>raidcfg -ctrl -l=log.txt
Controller_ID/Slot_ID: 0
Controller_PCI_ID: 4:2:1
Controller_Name: Dell PERC
6/E
Channels: 2
Virtual_Disks: 0
Firmware Version:
V2.8-0[6064]
RAIDCFG Command successful!
-si or silent
NA
Does not display any information on the terminal
console. This option is optional and can be added
to the command line in any order after any
mandatory options have been added.
Example:
A:>raidcfg -ctrl -si
-ver or version
NA
Displays the version number of the RAIDCFG
utility. This option is optional and can be added to
the command line in any order after any mandatory
options have been added.
Example:
A:>raidcfg -ver
RAIDCFG V4.4
Copyright (c) 2002-2014 Dell Inc.
RAIDCFG Command successful!
Quick Reference To RAIDCFG Commands
The following table lists the basic RAIDCFG commands.
Table 348. Quick Reference To RAIDCFG Commands
Purpose Command Description
To list all the RAID controllers
in a system
raidcfg -ctrl
Lists all the RAID controllers in the system.
Record the slot ID of the controllers for later reference.
Example:
A:>raidcfg -ctrl -ac=sghs -c=2 -ad=0:1
RAIDCFG Command successful!
To list all the disks attached to
a particular controller
raidcfg adisk -
c=slotid
Lists all the disks attached to the controller. The slot ID is
obtained from the first command.
183