Deployment Guide

Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
vdisk
action=replacepdi
sk adisk|
pdisk=channel:tar
get:enclosure
controllerid=id
Example:
A:>raidcfg -vd -ac=replacepd -vd=2
-c=2 -src=0:1 -dest=0:1
Consistency check for virtual disk
The following table lists the RAIDCFG options, parameters, and predefined arguments for a consistency check for a virtual disk.
Table 337. Consistency Check For Virtual Disk
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
-vd -c=id -vd=id
-ac=cc or vdisk
controllerid=id
vdisk=id
action=consistenc
ycheck
NA NA
Check consistency for a specified virtual disk.
Example:
A:>raidcfg -vd -c=2 -vd=2 -ac=cc
-vd -c=id -vd=id
-ac=ccc or vdisk
controllerid=id
vdisk=id
action=cancelcons
istencycheck
NA NA
Cancels the consistency check for the specified
virtual disk.
Example:
A:>raidcfg -vd -c=2 -vd=2 -ac=ccc
NOTE: Consistency check command is not applicable when RAID=0.
Erasing Encrypted Physical Disk
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for erasing encrypted physical disks.
Table 338. Erasing Encrypted Physical Disk
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ad -ad | —pd=
ch:targ:
enc1,ch:targ:encl
,... -
ac=insecerase -
c=id
or
adisk adisk |
pdisk=
channel:target:en
closure ,
channel:target:en
closure ,...
action=instantsec
ureerase
controllerid= id
NA NA
Erases the encrypted physical disk that is in ready
or foreign disk state.
Example:
A:>raidcfg -ad -ad=0:1,0:2
-ac=insecerase -c=2
178