Deployment Guide

Option Sub-option Valid Arguments Description
--msgcomm noflowctrl,
rtscts
Sets the IPMI message communication flow
control. This suboption can be replicated.
--msgcommdtrhangup
NA Reports the IPMI message communication DTR
hang-up. This suboption cannot be replicated.
--msgcommbitrate 9600, 19200,
57600, 115200
Sets the IPMI message communication baud
rate in bits per second (bps). This sub-option
can be replicated.
--tmcfglineediting enable, disable
Sets the line editing value for terminal mode
configuration. This sub-option can be replicated.
--tmcfgdelctrl del, bksp
Sets the delete control value for terminal mode
configuration. This sub-option can be replicated.
--tmcfgechoctrl echo, noecho
Sets the echo control value for terminal mode
configuration. This sub-option can be replicated.
--tmcfghandshakectrl enable, disable
Sets the handshake control value for terminal
mode configuration. This sub-option can be
replicated.
--tmcfgnewlineseq noterm, crlf,
null, cr, lfcr,
1f
Sets the new line sequence value for terminal
mode configuration. This sub-option can be
replicated.
--
tmcfginputnewlineseq
cr, null
Sets the input new line sequence value for
terminal mode configuration. This sub-option
can be replicated.
Example (to display the current serial
configuration settings):
A:>syscfg serialcfgparams
serialcfgparams tmcfgdelctrl=del
tmcfgechoctrl=echo
tmcfghandshakectrl=enable
connectionmode=terminal
tmcfgnewlineseq=crlf
msgcommflowctrl=rtscts
tmcfginputnewlineseq=cr
msgcommdtrhangup=disable
msgcommbitrate=19200
tmcfglineediting=enable
serialchannelaccess
Table 298. serialchannelaccess
Option Sub-option Valid Arguments Description
--serialchannelaccess
or sca
Sets or displays the channel access
settings for the serial channel. This option
can be replicated.
--ipmioverserial disable,
alwaysavail
Sets the serial channel access mode. This
sub-option can be replicated.
133