Deployment Guide

idecdrom
Table 260. idecdrom
Valid Arguments auto, off
Description
Turns the CD drive on or off. This option can be replicated.
Example:
A:>syscfg --idecdrom=auto
idecdrom=auto
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
idracgui
Table 261. idracgui
Valid Arguments enable, disable
Description
Enables and disables the iDRAC GUI. This option can be replicated.
Example:
A:>syscfg --idracgui=disable
idracgui=disable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
lpt
Table 262. lpt
Valid Arguments lpt1, lpt2, lpt3, disable
Description
Configures or reports the I/O address of the LPT (parallel) port. This option is available
on all supported systems with an LPT port. This option is recorded to an output file for
replication.
Example:
A:>syscfg --lpt=lpt1
lpt=lpt1
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
memdynamicpower
Table 263. memdynamicpower
Valid Arguments enable, disable
Description
Enables or disables the dynamic memory power states. This option can be replicated.
Example:
A:>syscfg --memdynamicpower=enable
memdynamicpower=enable
116