Deployment Guide

Example:
A:>syscfg --coreperformanceboost=enable
coreperformanceboost=enable
Applicable Systems PowerEdge R715, R815, R515, R415, and M915 systems with AMD Opteron 6000
series processor
dbpm
Table 229. dbpm
Valid Arguments enable, disable
Description
Enables or disables demand-based power management. This option can be replicated.
Example:
A:>syscfg --dbpm=enable
dbpm=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embhypervisor
Table 230. embhypervisor
Valid Arguments off, on
Description
Turns on or off the embedded hypervisor port.
Example:
A:>syscfg --embhypervisor=on
embhypervisor=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embideraid
Table 231. embideraid
Valid Arguments on, off
Description
Turns on or off the embedded IDE RAID controller. This option is only valid for
supported systems that have IDE ROMB. This option can be replicated.
Example:
A:>syscfg --embideraid=on
embideraid=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embnic1pxe
Table 232. embnic1pxe
Valid Arguments enable, disable
Description
Enables or disables Preboot Execution Environment (PXE) on the first embedded NIC.
If PXE is disabled, the first NIC is not found in the boot order. If PXE is enabled, the
104