Deployment Guide

SysProfile / profile
Table 191. SysProfile / profile
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: maxperformance,
osctl, apc, custom
● On Dell’s 12th generation PowerEdge and later systems: PerfPerWatt
OptimizedOs, PerfPerWatt OptimizedDapc, PerfOptimized, Custom, DenseCfg
Optimized
Description
Configures the system power profile. When set to a mode other than custom, BIOS
will set each option accordingly. When set to custom, you can change setting of
each option.
NOTE: On systems prior to Dell’s 12th generation PowerEdge systems,
profile is a sub-option of power.
Example:
A:>syscfg --profile=maxperformance
profile=maxperformance
Applicable Systems All PowerEdge systems
EnergyEfficientTurbo
Table 192. EnergyEfficientTurbo
Valid Arguments
● On systems prior to Dell’s 13th generation PowerEdge systems: NA
● On Dell’s 13th generation PowerEdge and later systems: Enabled, Disabled
Description
Enables or disables the Energy Efficient Turbo (EET). EET is a mode of operation
where the core frequency of a processor is adjusted within the turbo range based on
workload.
Example:
A:>syscfg --EnergyEfficientTurbo=Enabled
EnergyEfficientTurbo=Enabled
Applicable Systems Dell’s 13th generation PowerEdge and later systems
Proc n TurboCoreNum
Table 193. Proc
n TurboCoreNum
Valid Arguments
● On systems prior to Dell’s 13th generation PowerEdge systems: NA
● On Dell’s 13th generation PowerEdge and later systems: All, 1, 2, 4, 6, 8, 10, 12,
14, 16, 18
Description
Sets the number of Turbos Boost-enabled cores for a processor. By default, the
maximum number of cores per processor is enabled.
NOTE: The value of n in ProcnTurboCoreNum can be 0–3.
Example:
A:>syscfg --Proc1TurboCoreNum=6
Proc1TurboCoreNum=6
SYSCFG 95