Deployment Guide

Table 188. ProcCStates / cstates (continued)
● On Dell’s 12th generation PowerEdge and later systems
: Enabled, Disabled
Description Enables or disables the power c states of the processor. When enabled, the
processor can operate in all available power states.
A:>syscfg --cstates=enable
cstates=enable
Applicable Systems On Dell’s 12th generation PowerEdge and later systems
ProcPwrPerf / cpupowermode
Table 189. ProcPwrPerf / cpupowermode
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: min, max,
osdbpm, systemdbpm
● On Dell’s 12th generation PowerEdge and later systems: MaxPerf, MinPwr,
SysDbpm, OsDbpm
Description
Sets CPU Power Management to maximum performance, operating system DBPM,
or System DBPM (DAPC).
NOTE: The cpupowermode option is a suboption of Power.
Example:
A:>syscfg --ProcPwrPerf=OsDbpm
ProcPwrPerf=OsDbpm
Applicable Systems All PowerEdge systems.
ProcTurboMode / turbomode
Table 190. ProcTurboMode / turbomode
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: enable, disable
● On Dell’s 12th generation PowerEdge and later systems: Enabled, Disabled
Description
Enables or disables core-based turbo mode. Turbo mode is a feature on Intel
processors that allows one processor core to increase the frequency by one bin
whenever the other core has gone into an idle state. When enabled, the processor
can operate in Turbo Boost Mode.
Example:
A:>syscfg --turbomode=enable
--turbomode=enable
Applicable Systems Dell’s 11th generation PowerEdge and later systems running on Intel processors
94 SYSCFG