Deployment Guide

Table 170. SerialComm / serialcomm
Example:
A:>syscfg --SerialComm=OnNoConRedir
SerialComm=OnNoConRedir
Applicable Systems All Dell’s 12th generation PowerEdge and later systems
SerialPortAddress / serialportaddrsel
Table 171. SerialPortAddress / serialportaddrsel
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: default, alternate
● On Dell’s 12th generation PowerEdge and later systems: Serial1Com1Serial2Com2,
Serial1Com2Serial2Com1, Com1, Com2
Description
Sets the port address of the serial devices.
On systems prior to Dell’s 12th generation PowerEdge systems, when this option is
default, Serial Device 1 is set to COM port 1 and Serial Device 2 is set to COM port
2.
On systems prior to Dell’s 12th generation PowerEdge systems, when this option is
alternate, Serial Device 1 is set to COM port 2 and Serial Device 2 is set to COM
port 1.
This option can be replicated.
Example:
A:>syscfg --serialportaddrsel=default
serialportaddrsel=default
Applicable Systems Dell’s 11th generation PowerEdge and later systems
Slot Disablement
You can manage the slot disablement settings using the options in this group.
Slot n
Table 172. Slot
n
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Enabled, Disabled,
BootDriverDisabled
Description
Controls the configuration of the installed card in the specified slot.
NOTE: The value of n in Slotn can be 1–10.
Example:
A:>syscfg --Slot1=Enabled
Slot1=Enabled
Applicable Systems Dell’s 12th generation PowerEdge and later systems
88 SYSCFG