Deployment Guide

SataPortJCapacity*
Table 162. SataPortJCapacity
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
Displays the total capacity of a hard disk drive. This option is undefined for
removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortJCapacity
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SataPortJDriveType*
Table 163. SataPortJDriveType
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortJDriveType
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SataPortJModel*
Table 164. SataPortJModel
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortJModel
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SecurityFreezeLock
Table 165. SecurityFreezeLock (continued)
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Enabled, Disabled
Description
Sends the Security Freeze Lock command to the embedded SATA drives during
power-on self-test (POST). The option is applicable only to ATA and AHCI, and not
to RAID.
SYSCFG 85