Deployment Guide

ErrPrompt/f1f2promptonerror
Table 72. ErrPrompt/f1f2promptonerror
Valid Arguments
● On systems prior to 12G: enable, disable
● On 12G and later systems: Enabled, Disabled
Description
Enables or disables the BIOS to prompt F1 or F2 error codes.
Example:
A:>syscfg --f1f2promptonerror=enable
f1f2promptonerror=enable
Applicable Systems PowerEdge 10G and later systems
InSystemCharacterization
Table 73. InSystemCharacterization
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: FastBoot, OptimizedBoot, Disabled
Description
In-System Characterization (ISC) runs during power-on self-test (POST) on
detecting relevant changes in the system configuration to optimize power and
performance. ISC takes about 20 seconds to run, and a system restart is required
to apply the system configuration changes. The FastBoot option runs ISC
and continues without applying ISC results until the next system restart. The
OptimizedBoot option runs ISC and forces an immediate system restart to apply
the results. If set to Disabled, ISC does not run.
Example:
A:>syscfg --InSystemCharacterization=FastBoot
InSystemCharacterization=FastBoot
Table 73. InSystemCharacterization
Applicable Systems PowerEdge 12G and later systems
NumLock/numlock
Table 74. NumLock/numlock
Valid Arguments
● On systems prior to 12G: on, off
● On 12G and later systems: On, Off
Description
Turns the keyboard number lock on or off. This option is not replicated.
Example:
A:>syscfg --numlock=on
numlock=on
Applicable Systems All PowerEdge systems.
56 SYSCFG