Deployment Guide

Table 62. redmem
Description
Allows selection of the required redundant memory mode, or disables redundant
memory. This option can be replicated.
Example:
A:>syscfg --redmem=off
redmem=off
Applicable Systems PowerEdge systems with Intel Xeon 7500 series processor
SerialDbgOut
Table 63. SerialDbgOut
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: Enabled, Disabled
Description
Enables or disables the RC/MRC Serial debug output.
Example:
A:>syscfg --SerialDbgOut=Enabled
SerialDbgOut=Enabled
Applicable Systems PowerEdge 12G and later systems.
SysMemSize/mem*
Table 64. SysMemSize/mem*
Valid Arguments
● On systems prior to 12G: read-only
● On 12G and later systems: read-only
Description
Displays the amount of main memory in the system.
Example:
A:>syscfg --mem
mem=500
Applicable Systems PowerEdge 11G and later systems.
SnoopMode/snoopfilter
Table 65. SnoopMode/snoopfilter (continued)
Valid Arguments
● On systems prior to 12G: enable, disable
● On 12G and later systems: Enabled, Disabled
Description
Enables or disables the snoop filter option from the system BIOS.
SYSCFG 53