Deployment Guide

CurrentEmbVideoState
Table 48. CurrentEmbVideoState
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: read-only
Description
Displays the current state of the Embedded Video Controller.
Example:
A:>syscfg --CurrentEmbVideoState
CurrentEmbVideoState=xxx
Applicable Systems PowerEdge 12G and later systems
InternalSdCardPrimaryCard
Table 49. InternalSdCardPrimaryCard
Valid Arguments
● On systems prior to 13G: NA
● On 13G and later systems: SdCard1, SdCard2
Description
Sets an internal SD card as the primary SD card.
A:>syscfg --InternalSdCardPrimaryCard=SdCard1
InternalSdCardPrimaryCard=SdCard1
Table 49. InternalSdCardPrimaryCard
Applicable Systems PowerEdge 13G and later systems
Network Settings
You can manage the system network settings using the options in this group.
PxeDev n EnDis
Table 50. PxeDev
n EnDis
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: Enabled, Disabled
Description
Enables or disables the Preboot Execution Environment (PXE) device. When
enabled, a Unified Extensible Firmware Interface (UEFI) boot option is created for
the PXE device.
NOTE: The value of n in PxeDevnEnDis can be 1–4.
Example:
A:>syscfg --PxeDev1EnDis=Enabled
PxeDev1EnDis=Enabled
Applicable Systems PowerEdge 12G and later systems
48 SYSCFG