Deployment Guide

Table 39. InternalSdCardRedundancy/embsdcardredundancy
Valid Arguments
● On systems prior to 12G: mirrormode, disable
● On 12G and later systems: Mirror, Disabled
Description
Sets the internal SD card port redundancy to Mirror mode or Disabled.
When set to Mirror mode, read-write operation occurs on both the secure digital
(SD) cards. When one of the SD cards fails and is replaced, on booting, the data of
the active card is copied to the offline card.
When set to Disabled, read-write operation occurs only on SD card 1.
NOTE: On Blade systems, disable the vflash key to configure this option.
Example:
A:>syscfg --embsdcardredundancy=mirrormode
embsdcardredundancy=mirrormode
Applicable Systems All PowerEdge systems
InternalUsb/internalusb
Table 40. InternalUsb/internalusb
Valid Arguments
● On systems prior to 12G: off, on
● On 12G and later systems: On, Off
Description
Turns the internal USB port on or off.
Example:
A:>syscfg --internalusb=on
internalusb=on
Applicable Systems All PowerEdge systems.
InternalUsb1/internalusbport1
Table 41. InternalUsb1/internalusbport1
Valid Arguments
● On systems prior to 12G: on, off
● On 12G and later systems: On, Off
Description
Turns the internal USB port 1on or off.
Example:
A:>syscfg --internalusbport1=on
internalusbport1=on
Applicable Systems All PowerEdge systems.
SYSCFG 45