Deployment Guide

Table 30. EmbNic3Nic4/embnic3nic4
Description
Enables or disables the operating system interface of the third and fourth embedded
NIC controllers.
Example:
A:>syscfg --EmbNic3Nic4=enable
--embnic3nic4=enable
Applicable Systems PowerEdge 11G and later systems
EmbNic4/embnic4
Table 31. EmbNic4/embnic4
Valid Arguments
● On systems prior to 12G: on, off, onnopxe, onwithiscsi
● On 12G and later systems: Enabled, EnabledPxe, EnablediScsi, Disabled
Description
Turns the fourth embedded NIC on with PXE enabled, off, or on without PXE
enabled. This option is only valid for supported systems that have four embedded
NICs. If the fourth NIC is enabled without PXE, it is not found in the boot order. If
the fourth NIC is turned on with PXE, it is placed at the end of the boot order. The
onnopxe argument is not supported on all systems. This option can be replicated.
The onwithiscsi argument enables the embedded NIC to boot from the iSCSI
server. The embnic4 option can be replicated.
Example:
A:>syscfg --embnic4=onnopxe
embnic4=onnopxe
Applicable Systems All PowerEdge systems
EmbVideo/embvideoctrl
Table 32. EmbVideo/embvideoctrl
Valid Arguments
● On systems prior to 12G: enable, disable
● On 12G and later systems: Enabled, Disabled
Description
Enables or disables the BIOS support for the Embedded Video Controller
Example:
A:>syscfg --embvideoctrl=enable
embvideoctrl=enable
Applicable Systems PowerEdge 11G and later systems
IoatEngine/ioat
Table 33. IoatEngine/ioat
42 SYSCFG