Deployment Guide

Table 305. version*
Option Sub-option Valid Arguments Description
--version*
NA NA Displays the version information for the SYSCFG
utility.
virutualmedia
Table 306. virutualmedia
Option Sub-option Valid Arguments Description
--virutualmedia
NOTE: This
option is available
only with the
appropriate installed
license.
NA
enable, disable,
auto
Enables or disables the virtual media. This option
cannot be replicated.
SYSCFG For State Configuration
The SYSCFG utility allows the user to write a state data value on a system. This value is preserved across reboot or power-off
operations. Users can use this state data value for storing important state information, such as the progress of a multi-reboot
deployment process.
SYSCFG Options For State Configuration
The following table lists all valid options and arguments along with a description of the expected behavior of each option.
NOTE: Some of the following options or arguments are not available on all systems.
Table 307. SYSCFG Options For State Configuration (continued)
Option Valid Arguments Description
-b or --byte <string>
Specifies a value to write to state data. The format of the argument must
be in decimal format unless the -x option is given. If the -x option is given,
the value is interpreted as hexadecimal format. The value can optionally
contain 0x. The decimal range is 0–255, and the hexadecimal range is
0x00–0xFF.
Example:
A:>syscfg -b 1
The state byte has been set to 1.
A:>syscfg -b 2 -x
The state byte has been set to 0x02.
-r or --read*
NOTE: The asterisk
is not part of the
command syntax.
NA
Reads the value of state data. When used with the -x option, the value is
reported in hexadecimal format (0xNN).
SYSCFG 147