Deployment Guide

Table 295. racreset*
Option Sub-option Valid Arguments Description
--racreset*
NA NA Resets the RAC. It cannot be accompanied
with any other option. This option cannot be
replicated.
serialcfgparams
Table 296. serialcfgparams (continued)
Option Sub-option Valid Arguments Description
serialcfgparams
or scp
Configures and displays serial configuration
parameters. This option can be replicated.
--connectionmode basic, terminal
Sets the connection mode used to perform
IPMI messaging to the BMC. This sub-option
can be replicated.
--msgcomm noflowctrl,
rtscts
Sets the IPMI message communication flow
control. This suboption can be replicated.
--msgcommdtrhangup
NA Reports the IPMI message communication
DTR hang-up. This suboption cannot be
replicated.
--msgcommbitrate 9600, 19200,
57600, 115200
Sets the IPMI message communication baud
rate in bits per second (bps). This sub-option
can be replicated.
--tmcfglineediting enable, disable
Sets the line editing value for terminal
mode configuration. This sub-option can be
replicated.
--tmcfgdelctrl del, bksp
Sets the delete control value for terminal
mode configuration. This sub-option can be
replicated.
--tmcfgechoctrl echo, noecho
Sets the echo control value for terminal
mode configuration. This sub-option can be
replicated.
--tmcfghandshakectrl enable, disable
Sets the handshake control value for terminal
mode configuration. This sub-option can be
replicated.
--tmcfgnewlineseq noterm, crlf,
null, cr,
lfcr,1f
Sets the new line sequence value for terminal
mode configuration. This sub-option can be
replicated.
--
tmcfginputnewlineseq
cr, null
Sets the input new line sequence value for
terminal mode configuration. This sub-option
can be replicated.
140 SYSCFG