Deployment Guide

Table 290. nmibutton
Option Sub-option Valid Arguments Description
Example:
A:>syscfg --nmibutton=enable
nmibutton=enable
passwordaction
Table 291. passwordaction
Option Sub-option Valid Arguments Description
passwordaction
Configures and tests the password for the
specified User ID. This option cannot be
replicated. All three sub-options, action,
userid, and password must be included in the
command line.
NOTE: This option does not support 20 byte
passwords.
--userid
2–16, if your system
has a DRAC 5 controller
Specifies the BMC User ID. This sub-option
cannot be replicated.
--action setpassword,
testpassword
Sets or tests the password for the specified User
ID. This sub-option cannot be replicated.
--password <string>
Sets the password (maximum of 16 printable
ASCII characters) for the specified BMC User ID.
This sub-option cannot be replicated.
Example (to set and test the password for User
ID 3):
A:>syscfg passwordaction --
userid=3 --action=setpassword
--password=bmcmaster
passwordaction userid=3
action=setpassword
password=*********
A:>syscfg passwordaction --
userid=3 --action=testpassword --
password=bmcmastor
Password test failed.
pefcfgparams
Table 292. pefcfgparams (continued)
Option Sub-option Valid Arguments Description
pefcfgparams or
pcp
Configures and displays PEF configuration
parameters. This option can be replicated.
--filter fanfail,
voltfail,
Specifies a PEF value. This sub-option can be
replicated.
SYSCFG 137