Deployment Guide

Script Name Description Associated Files
• syscfg— Used by raccap.sh to configure DRAC.
raidcap.sh Captures the RAID settings and saves
them to a file.
• tkenvset.sh — Used by raidcap.sh to inform the task scripts where
to find the DTK utilities, scripts, and configuration files.
• raidcfg — Used by raidcap.sh to retrieve RAID information and to
configure settings.
syscap.sh Captures BIOS, DRAC, and BMC
configuration settings and saves them
to a file.
• tkenvset.sh — Used by syscap.sh to inform the task scripts where
to find the DTK utilities, scripts, and configuration files.
• syscfg — Used by syscap.sh to configure the BIOS, DRAC, and BMC
settings.
Replication scripts for deployment on systems running windows operating system
The following table lists the replication scripts for systems running Windows.
Table 22. Replication Scripts for Windows
Script Name Description Associated Files
RACREP.BAT Applies the RAC configuration settings
saved in a file to the current system.
• TKENVSET.BAT — Used by RACREP.BAT to inform the task
scripts about where to find the DTK utilities, scripts, and
configuration files.
• RACADM.EXE — Used by RACREP.BAT to replicate RAC
information and to configure settings.
RAIDREP.BAT Applies the RAID settings saved in a
file to the current system.
• RAIDCFG.EXE — Used by RAIDREP.BAT to retrieve RAID
information and to configure settings.
SYSREP.BAT Applies the BIOS and BMC settings
saved in a file to the current system.
• TKENVSET.BAT — Used by SYSREP.BAT to inform the task
scripts where to find the DTK utilities, scripts, and configuration
files.
• SYSCFG.EXE — Used by SYSREP.BAT to configure the BIOS and
BMC settings.
Replication scripts for deployment on systems running Linux operating system
The following table lists the replication scripts for systems running Linux.
Table 23. Replication Scripts for Linux
Script Name Description Associated Files
racrep.sh Applies the RAC configuration settings
saved in a file to the current system.
• tkenvset.sh — Used by racrep.sh to inform the task scripts about
where to find the DTK utilities, scripts, and configuration files.
• racadm — Used by racrep.sh to replicate the RAC information and
to configure settings. The wrapper script, racadm invokes racadm4,
racadm5, or racadm6 depending on the system configuration.
• syscfg — Used by racrep.sh to configure DRAC5.
sysrep.sh Applies the BIOS and BMC settings
saved in a file to the current system.
• tkenvset.sh — Used by sysrep.sh to inform the task scripts about
where to find the DTK utilities, scripts, and configuration files.
• syscfg — Used by sysrep.sh to configure the BIOS settings.
Deployment scripts for systems running windows operating systems
The following table lists the deployment scripts for Windows.
40