Deployment Guide

Group SYSCFG Commands Equivalent RACADM Commands

Slot Disablement --Slotn BIOS.SlotDisablement.Slotn

System Information --svctag BIOS.SysInformation.SystemServiceTag

System Security --AcPwrRcvryDelay BIOS.SysSecurity.AcPwrRcvryDelay

--PwrButton BIOS.SysSecurity.PwrButton

--SetupPassword BIOS.SysSecurity.SetupPassword

--SysPassword BIOS.SysSecurity.SysPassword

System Power --maxpowercap System.Power.Cap.MaxThreshold

--minpowercap System.Power.Cap.MinThreshold

--capenable System.Power.Cap.Enable

Sample scripts for deployment

Sample deployment scripts and configuration files for deployment of DTK on Dell systems.

Sample deployment configuration files for Windows

The following table describes examples of Windows configuration files used to perform a scripted deployment. The Windows files

for 32-bit and 64-bit supported systems are located in the following directories:

• \Dell\x32\Toolkit\Template\Configs

• \Dell\x64\Toolkit\Template\Configs

NOTE: All configuration files are provided as examples only. These sample configuration files must be edited before they

can be used in any deployment tasks.

Table 14. Sample Configuration Files for Windows

Toolkit Components Purpose Location

raccfg.ini

Sample configuration file for DRAC4 remote access

controllers.

\Toolkit\Systems\<system>

raidcfg.ini

Sample output file to enable RAID replication. \Toolkit\Systems\<system>

winbom.ini

Sample file used to start the racsvc and mr2kserv services. \Toolkit\Template\Configs

winpeoem.sif

Sample file to add support for Dell mass storage drivers. \Toolkit\Template\Configs

Sample deployment configuration files for Linux

The following table describes examples of Linux configuration files used to perform a scripted deployment. The Linux files are at

opt/dell/toolkit/template/configs.

NOTE: All configuration files are provided as examples only. The sample configuration files must be edited before they

can be used in any deployment tasks.