Manualshelf

Deployment Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Deployment Toolkit Version 5.4
21222324252627282930
Contents Details
/var Any run-time variable data that might be required for embedded Linux and tools to function.
/tmp The only safe, writable area. However, all the data in this folder is lost every time you reboot.
/usr Miscellaneous tools and libraries for embedded Linux to function.
DTK contents
DTK contains Windows PE-based or Linux-based utilities, utility to convert SYSCFG to RACADM commands, sample scripts, sample
configuration files, drivers, RPMs, and documentation for automating the deployment on Dell systems. For a more information on
DTK utilities, see the Dell OpenManage Deployment Toolkit Command Line Interface Reference Guide. For more information on
sample configuration files and scripts, see Editing The Sample Batch Files To Perform A Complete System Deployment and
Preparing The Script Files.
System utilities and supported files for windows
The following table lists the files located in Toolkit\Tools on systems running the Windows operating system. These are the core
tools (utilities) that perform preoperating system configuration and deployment tasks. See the Dell OpenManage Deployment
Toolkit Command Line Interface Reference Guide at dell.com/openmanagemanuals for complete information about the capabilities
of each DTK utility.
Table 11. System Utilities and Supported Files for Windows
Toolkit Components Purpose
mr2kserv.exe
Service required to run (in 32-bit systems) raidcfg.exe functions.
raidcfg.exe
Creates and reports Redundant Array of Independent Disks (RAID) information.
syscfg.exe
• Reports and configures
– BIOS settings and options
– BMC settings and options
– RAC 5 settings and options
– iDRAC settings and options
• Maintains system state between reboots.
• Reports hardware devices and other system-related information.
sysdrmk.exe
Used by UPINIT.BAT to patch the boot sector and Master Boot Record (MBR).
config.ini
Configuration file used by raidcfg.exe.
CAUTION: Do not edit this file. Incorrect edits might cause raidcfg.exe to fail.
stsvc.ini
Configuration file used by raidcfg.exe.
CAUTION: Do not edit this file. Incorrect edits might cause raidcfg.exe to fail.
sys.ini
Configuration file used by DTK for deployment.
IDRAC
Configures iDRAC 6.
NOTE: This feature may not be supported on all systems.
24