Deployment Guide

Compute sled to PowerEdge FD332
setup
Operating
system
installation
support
SYSCFG/RAIDCFG
configuration support
Description
Compute sled with PERC + 1 PowerEdge
FD332 with a dual PERC mapped to the
compute sled (joint mode) + single boot VD
Yes Yes PERC controller with boot VD must be
the first in the boot order list of the
compute sled BIOS
Compute sled with PERC + 1 PowerEdge
FD332 with a dual PERC mapped to the
compute sled (split mode) + single boot VD
Yes Yes PERC controller with boot VD must be
the first in the boot order list of the
compute sled BIOS
Compute sled without PERC + multiple
PowerEdge FD332 with a dual PERC
mapped to the compute sled (joint mode) +
single boot VD
Yes Yes PERC controller with boot VD must be
the first in the boot order list of the
compute sled BIOS.
Compute sled without PERC + multiple
PowerEdge FD332 with a dual PERC
mapped to the compute sled (split mode) +
single boot VD
Yes Yes PERC controller with boot VD must be
the first in the boot order list of the
compute sled BIOS
Compute sled without PERC + multiple
PowerEdge FD332 with a single PERC
mapped to the compute sled + single boot
VD
Yes Yes PERC controller with boot VD must be
the first in the boot order list of the
compute sled BIOS
Compute sled with PERC + multiple
PowerEdge FD332 with a dual PERC
mapped to the compute sled (joint mode) +
single boot VD
Yes Yes PERC controller with boot VD must be
the first in the boot order list of the
compute sled BIOS.
Compute sled with PERC + multiple
PowerEdge FD332 with a dual PERC
mapped to the compute sled (split mode) +
single boot VD
Yes Yes PERC controller with boot VD must be
the first in the boot order list of the
compute sled BIOS
Compute sled with PERC + multiple
PowerEdge FD332 with a single PERC
mapped to compute sled + single boot VD
Yes Yes PERC controller with boot VD must be
the first in the boot order list of the
compute sled BIOS
Compute sled with PERC + PowerEdge
FD332 (single/multiple) with a dual PERC
mapped to the compute sled (joint mode) +
multiple boot VD
No Yes No scenario to install operating system
with multiple boot VD
Compute sleds (with/without) PERC +
PowerEdge FD332 (single/multiple) with a
dual PERC mapped to the compute
sleds (split mode) + multiple boot VD
No Yes No scenario to install operating system
with multiple boot VD
Compute sled with PERC + PowerEdge
FD332 (single/multiple) with a single PERC
mapped to the compute sled + multiple
boot VD
No Yes No scenario to install operating system
with multiple boot VD
18