CLI Guide

Example:
A:>syscfg --ProcPwrPerf=OsDbpm
ProcPwrPerf=OsDbpm
Applicable Systems All PowerEdge systems.
--ProcTurboMode/--turbomode
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Enabled, Disabled
Description
Enables or disables core-based turbo mode. Turbo mode is a feature
on Intel processors that allows one processor core to increase the
frequency by one bin whenever the other core has gone into an idle
state. When enabled, the processor can operate in Turbo Boost
Mode.
Example:
A:>syscfg --turbomode=enable
--turbomode=enable
Applicable Systems PowerEdge 11G and later systems running on Intel processors
--SysProfile/--profile
Valid Arguments
• On systems prior to 12G: maxperformance, osctl, apc, custom
• On 12G and later systems: PerfPerWatt OptimizedOs, PerfPerWatt
OptimizedDapc, PerfOptimized, Custom, DenseCfg Optimized
Description
Configures the system power profile. When set to a mode other than
custom, BIOS will set each option accordingly. When set to custom,
you can change setting of each option.
NOTE: On systems prior to 12G, profile is a sub-option of
power.
Example:
A:>syscfg --profile=maxperformance
profile=maxperformance
Applicable Systems All PowerEdge systems
--EnergyEfficientTurbo
Valid Arguments
• On systems prior to 13G: NA
• On 13G and later systems: Enabled, Disabled
Description
Enables or disables the Energy Efficient Turbo (EET). EET is a mode of
operation where the core frequency of a processor is adjusted within
the turbo range based on workload.
97