CLI Guide

--CollaborativeCpuPerfCtrl
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Enabled, Disabled
Description
When set to Enabled, the operating system demand based power
management (OS DBPM) and system demand based power
management (System DBPM) controls the CPU power management.
This feature can be enabled only when CPU power management
(ProcPwrPerf) is set to system DBPM in Custom mode.
Example:
A:>syscfg --CollaborativeCpuPerfCtrl=Enabled
CollaborativeCpuPerfCtrl=Enabled
Applicable Systems PowerEdge 12G and later systems
--MemFrequency/--memorypowermode
Valid Arguments
• On systems prior to 12G: min, 978, 800, 1067, 1333, max
• On 12G and later systems: MaxPerf, 2133MHz, 1866MHz,
1600MHz, 1333MHz, 1067MHz, 800MHz, MaxReliability
Description
Sets the speed of system memory.
NOTE: On systems prior to 12G, memorypowermode is a sub-
option of Power.
Example:
A:>syscfg --MemFrequency=MaxPerf
MemFrequency=MaxPerf
Applicable Systems All PowerEdge systems.
--MemPatrolScrub
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Standard, Extended, Disabled
Description
Sets the Memory Patrol Scrub frequency as Standard Mode,
Extended Mode, or Disabled.
Example:
A:>syscfg --MemPatrolScrub=Standard
MemPatrolScrub=Standard
Applicable Systems PowerEdge 12G and later systems.
94