CLI Guide

• On 12G and later systems: OnNoConRedir, OnConRedirCom1,
OnConRedirCom2, Off
Description Enables or disables the serial communication devices (Serial Device 1
and Serial Device 2) in BIOS.
Example:
A:>syscfg --SerialComm=OnNoConRedir
SerialComm=OnNoConRedir
Applicable Systems All PowerEdge 12G and later systems.
--SerialPortAddress/--serialportaddrsel
Valid Arguments
• On systems prior to 12G: default, alternate
• On 12G and later systems: Serial1Com1Serial2Com2,
Serial1Com2Serial2Com1, Com1, Com2
Description
Sets the port address of the serial devices.
On systems prior to 12G, when this option is default, Serial Device 1 is
set to COM port 1 and Serial Device 2 is set to COM port 2.
On systems prior to 12G, when this option is alternate, Serial Device 1
is set to COM port 2 and Serial Device 2 is set to COM port 1.
This option can be replicated.
Example:
A:>syscfg --serialportaddrsel=default
serialportaddrsel=default
Applicable Systems
PowerEdge 11G and later systems
Slot Disablement
You can manage the slot disablement settings using the options in this group.
--Slotn
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Enabled, Disabled, BootDriverDisabled
Description
Controls the configuration of the installed card in the specified slot.
NOTE: The value of n in Slotn can be 1–10.
Example:
A:>syscfg --Slot1=Enabled
Slot1=Enabled
Applicable Systems PowerEdge 12G and later systems
91