CLI Guide

--SataPortC/--sata2
Valid Arguments
• On systems prior to 12G: auto, off
• On 12G and later systems: Off, Auto
Description
Turns the SATA port 2 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata2=auto
sata2=auto
Applicable Systems All PowerEdge systems
--SataPortCCapacity*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the total capacity of a hard-disk drive. This option is
undefined for removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortCCapacity
Applicable Systems PowerEdge 12G and later systems.
--SataPortCDriveType*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Indicates the type of device attached to the SATA port.
Example:
A:>syscfg --SataPortCDriveType
Applicable Systems Dell PowerEdge 12G and later systems
--SataPortCModel*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortCModel
Applicable Systems PowerEdge 12G and later systems.
81