CLI Guide

• On 12G and later systems: Off, Auto
Description
Sets the embedded SATA port1 to auto or off.
Example:
A:>syscfg --eSataPort1=Off
eSataPort1=Off
Applicable Systems Dell PowerEdge 12G and later systems.
--eSataPort1Capacity*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the total capacity of a hard-disk drive. This option is
undefined for removable-media devices such as optical drives.
Example:
A:>syscfg --eSataPort1Capacity
Applicable Systems PowerEdge 12G and later systems.
--eSataPort1DriveType*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Indicates the type of device attached to the embedded SATA port.
Example:
A:>syscfg --eSataPort1DriveType
Applicable Systems PowerEdge 12G and later systems.
--eSataPort1Model*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --eSataPort1Model
Applicable Systems PowerEdge 12G and later systems.
--SataPortA/--sata0
Valid Arguments
• On systems prior to 12G: auto, off
78