CLI Guide

• On 12G and later systems: Enabled, Disabled
Description
Enables or disables the Preboot Execution Environment (PXE) device.
When enabled, an Unified Extensible Firmware Interface (UEFI) boot
option is created for the PXE device.
NOTE: The value of n in PxeDevnEnDis can be 1–4.
Example:
A:>syscfg --PxeDev1EnDis=Enabled
PxeDev1EnDis=Enabled
Applicable Systems PowerEdge 12G and later systems
--PxeDevnInterface
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the NIC interface used for the PXE device.
NOTE: The value of n in PxeDevnInterface can be 1–4.
Example:
A:>syscfg --PxeDev1Interface
Applicable Systems PowerEdge 12G and later systems
--PxeDevnProtocol
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the IP version used for the PXE device.
NOTE: The value of n in PxeDevnVlanId can be 1–4.
Example:
A:>syscfg --PxeDev1Protocol
Applicable Systems PowerEdge 12G and later systems
--PxeDevnVlanEnDis
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Enabled, Disabled
Description
Enables or disables the virtual LAN (VLAN) of the PXE device.
NOTE: The value of n in PxeDevnVlanEnDis can be 1–4.
56