CLI Guide

Error Code Message
40 WRONG GRAPHICS MODE
41 CONFIG SPACE LOCKED
42 MASTER LOCKED
43 ASB BUS LOCKED
44 HISTORY MONITORS NOT YET AVAILABLE
45 NO VALID VALUE FOR THIS FIELD
46 DIAGNOSTIC TASK ERROR
47 DIAGNOSTIC TASK IS ALREADY RUNNING
48 NO DIAGNOSTIC TASK RUNNING
49 READ ONLY
50 SNARFING IS NOT AVAILABLE
51 TEXT RESOLUTION OF SERVER CHANGED
52 MODULE NOT LOADED
53 IPMI ERROR
54 ERROR IN DIAGNOSTIC FUNCTION
RACADM Utility Error Codes And Messages
Table below lists RACADM utility error codes and messages.
Table 56. RACADM Error Codes and Messages
Error Code Message
513 An unknown failure occurred.
514 Librac library not initialized.
515 An invalid parameter was passed into function.
516 Invalid DRSTYPE specified.
517 Librac library already initialized.
518 Invalid transport type specified.
519 Invalid library user.
520 A connection to the RAC controller could not be established.
521 Failed to perform read operation with RAC controller.
522 Failed to perform write operation with RAC controller.
523 Invalid message ID.
236