CLI Guide

Error Code Message
1023 Unsupported operation. Preserved cache is not present on the
controller.
1024 Invalide Key Id
1025 Encryption key is already set for the controller.
1026 Cannot delete the encryption key because secure virtual disk
is present.
1027 The passphrase is invalid or old.
1028 Cannot increase the virtual disk size due to lack of free
space or due to the presence of partial virtual disks on the
same set of array disks.
1029 The percentage value of virtual disk size must be in the range
1-100.
1030 Error! Cannot discard the preserved cache. Use '-force' option
to discard the cache.
1031 Cannot create a new virtual disk because preserved cache is
present on the controller. To clear the cache, either import
the related virtual disks or discard the cache.
1032 Unsupported RAID value. The expand virtual disk size operation
is allowed only on RAID-0, RAID-1, RAID-5, and RAID-6.
1033 Unsupported file type. Supported file types are .ini, .log,
and .txt.
RACADM Firmware Error Codes And Messages
Table below lists RACADM firmware error codes and messages.
Table 55. RACADM Firmware Error Codes and Messages
Error Code Message
1 UNKNOWN COMMAND.
2 OUTPUT ERROR
3 TOO FEW ARGUMENTS
4 UNKNOWN PARAMETER
5 CAN'T LOCK RESOURCE
6 RESOURCE LOCKED
7 USER NOT IN DATABASE
8 WRONG PASSWORD
234