CLI Guide

Error Code Message
132 Invalid controller state.
133 Controller failed.
134 Controller busy.
135 Controller does not exist.
136 Controller name is invalid.
137 Controller is iterated.
138 Rename of virtual disk was not successful.
139 The controller was not able to erase the file system from the
specified virtual disk.
140 The controller was not able to add space to the specified
concatenation set.
141 The controller was not able to get the status of the specified
mirror set.
142 The controller was not able to set the requested failover
space.
143 The controller cannot get the failover space information.
144 Controller cannot unmirror the specified virtual disk.
145 The controller could not split the specified virtual disk.
146 The controller could not lock the specified virtual disk.
147 Controller IO paused.
148 No controller parameter support.
149 Controller does not recognize parameter symbol.
150 Controller Battery Recondition failed.
151 Controller Get disk signature failed.
152 Controller Read Flags failed.
153 Controller Set Flags failed.
154 Controller Remove Snap Shot failed.
155 Controller not supported.
156 Controller device initialization failure.
157 Partner controller already opened readwrite.
158 No partner controller found.
159 The virtual disk is not valid for requested operation.
228