CLI Guide

Error Code Message
106 SMART report count not supported.
107 Operations on hidden virtual disks are not allowed.
108 Virtual disk is in use.
109 The virtual disk is in use. It cannot be reconfigured at this
time.
110 Virtual disk operation is temporarily unavailable.
Initialization in progress.
111 Virtual disk operation is temporarily unavailable.
Reconstruction in progress.
112 Virtual disk operation is temporarily unavailable. Rebuild in
progress.
113 Virtual disk operation is temporarily unavailable. Check
consistency in progress.
114 Specified virtual disk too small.
115 Virtual disk operation not supported. Size too small.
116 Operation is temporarily unavailable. Space in use.
117 Cannot reconfigure to the given RAID level.
118 Cannot reconfigure from current RAID level to the given RAID
level.
119 One of the array disks selected for the virtual disk is
already in use.
120 Virtual disk operation not supported. Cannot use non-RAID
disk.
121 Controller Read Configuration failed.
122 Controller Write Configuration failed.
123 Controller cache flush failed.
124 Enable alarm on controller failed.
125 Disable alarm on controller failed.
126 Quiet alarm on controller failed.
127 Controller failed to perform the task.
128 Specified bus not found for controller.
129 Call to set cache mode on the controller failed.
130 Unexpected controller error.
131 Controller out of memory.
227