CLI Guide

Table 45. Setting Boot mode
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-ctrl -c=id -
ac=sbm —bm=<0|
1|2> or
controller
controllerid=i
d
action=setboot
mode
bootmode=<0|1|
2>
NA NA
Sets the boot mode of the controller to
any of the following during the system
start or reboot:
• Stop on error (0)
• Continue on error (1)
• Continue headless on error (2)
Example:
A:>raidcfg -ctrl -c=2 -ac=sbm -
bm=0
Configuring Auto Import
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for configuring
the auto import property of the controller.
Table 46. Configuring Auto Import
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-ctrl -c=id -
ac=eai —ai=<0|
1> or controller
controllerid=i
d
action=enablea
utoimport
autoimport=<0|
1>
NA NA
Sets the auto import property of the
controller to 1 (enables the auto import
property to automatically import the
foreign configuration) or 0 (disables the
auto import property).
Example:
A:>raidcfg -ctrl -c=2 -ac=eai -
ai=0
Miscellaneous Options
The following table lists all other RAIDCFG options, parameters, and pre-defined arguments.
Table 47. Miscellaneous Optional Parameters
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
any option
-l or logfile <filename>
Logs command line output to a file. The
utility either appends the information to
an existing log file or creates a new file.
The log file contains the same
information as standard output. This
option is optional and can be added to
203