CLI Guide

Option Valid Arguments Description
Example:
A:>syscfg --envfile sys.ini
DELLNIC1=INTEL PRO100
DELLNIC2=INTEL PRO100
DVIDEO1=RAGEXL
DIDE1=PEQUR/ROSS IDE
DSCSI1=AIC-7899
--mem*
None
Reports the amount of system memory physically installed in
the system, not the amount of memory available to an
operating system. If used with the -s option, the environment
variable is set to the amount of system memory. The last two
characters of the memory value indicate the order of
magnitude used (KB or MB).
Example:
A:>syscfg --mem
mem=256MB
-n <filename>
Specifies an input file to use for resolving PCI vendor and
device numbers to strings. The file must be present (with read
rights) and contain a properly formatted list. For more
information, see PCI Reporting . This option must be used
with the pci option.
Example:
A:>syscfg -n pci.txt --pci
PCI Bus: 2, Device: 4, Function: 0
Vendor: 8086 - Intel Corp.
Device: 1229 - 82557/8/9 [Ethernet Pro
100]
Sub Vendor:8086 - Intel Corp.
Sub Device:1017 - EtherExpress
PRO/100+ Dual Port Server Adapter
Slot: 01
Class: 02 - Network
SubClass: 00 - Ethernet
--ovrwrt*
None
When used with the outfile option, this option specifies
that the output file should be overwritten if it exists.
NOTE: This option is applicable only on PowerEdge
systems prior to 12G.
Example:
A:>syscfg -outfile=out.ini --ovrwrt
--pci*
None
Performs a scan of all PCI buses and displays the results. The
utility uses an open source pci.ids file for vendor/device
name resolution. The utility looks for a file called pci.ids in
the current working directory. If the file is not found in the
153