CLI Guide

--vflash
Valid Arguments enable, disable
Description
Enables or disables vflash on iDRAC.
Example:
A:>syscfg --vflash=enable
vflash=enable
Applicable Systems All PowerEdge 11G systems or systems with iDRAC6
identify
Valid Arguments
0–254
Description
Flashes the identification LED for a specified number of seconds.
NOTE: Use 0 to stop the blinking of the LED.
Example:
A:>syscfg --identify=10
identify=10
Applicable Systems All PowerEdge 11G systems with a BMC
idracversion
Option Sub-option Valid Arguments Description
--idracversion
Displays the version information for
the iDRAC and the iDRAC firmware.
This option cannot be replicated.
--devid
NA
Reports the iDRAC device ID.
--devrevision
NA
Reports the iDRAC device revision.
--majorfwversion
NA
Reports the major firmware revision
of iDRAC.
--minorfwversion
NA
Reports the minor firmware revision
of iDRAC.
A:>syscfg --idracversion
devid=32
devrevision=0
majorfwversion=0
minorfwversion=40
132